Every good part starts with the right mould.
From design review to the final approved sample — we manage the development of your injection moulds and extrusion dies with experienced tool makers.
Moulds built for reliable serial production
The mould decides the quality, cycle time and cost of every part you will ever buy. That is why we involve experienced tool makers from day one — reviewing your design, choosing the right tool concept and following the build until the samples are approved.
You own the tool. It is used only for your parts, stored safely and maintained throughout production.
- Design-for-manufacturing review
- Mould design and 3D tool layout
- Tool steel and hot-runner selection
- First samples with measurement report
- Tool corrections until sign-off
- Maintenance during production
From Drawing to Approved Tool
A clear, documented process — so you always know where your mould stands.
Design Review
We check your part drawing or 3D file for mouldability — wall thickness, draft angles, gates and tolerances.
Tool Concept & Quote
Number of cavities, runner system and tool steel are chosen to match your volumes and budget.
Mould Design Approval
You receive the tool layout for review. Manufacturing starts only after your approval.
Tool Manufacturing
The mould is machined, assembled and fitted. We follow progress and share regular updates.
Trials & Samples
First trial shots are measured and sent to you with a report. Corrections are made if needed.
Approval & Production
After your sign-off the tool goes into serial production and is maintained throughout its life.
Tool Types We Manage
| Tool type | Best suited for |
|---|---|
| Prototype / soft tools | Samples, small series and design validation at low tool cost |
| Single-cavity moulds | Large or complex parts and medium volumes |
| Multi-cavity moulds | High-volume production at a lower price per part |
| Family moulds | Several matching parts of one assembly in a single tool |
| Hot-runner moulds | Less material waste, faster cycles, better surface |
| Insert & 2-component moulds | Parts with metal inserts or soft-touch overmoulding |
| Extrusion dies | Custom profiles, tubes and sections |